DWEBP(1)                                                              DWEBP(1)



NAME
       dwebp - decompress a WebP file to an image file

SYNOPSIS
       dwebp [options] input_file.webp

DESCRIPTION
       This manual page documents the dwebp command.

       dwebp decompresses WebP files into PNG, PAM, PPM or PGM images.

OPTIONS
       The basic options are:

       -h     Print usage summary.

       -version
              Print the version number (as major.minor.revision) and exit.

       -o string
              Specify  the name of the output file (as PNG format by default).
              Using "-" as output name will direct output to 'stdout'.

       -- string
              Explicitly specify the input file. This option is useful if  the
              input  file  starts  with  an '-' for instance. This option must
              appear last.  Any other options afterward will  be  ignored.  If
              the  input file is "-", the data will be read from stdin instead
              of a file.

       -bmp   Change the output format to uncompressed BMP.

       -tiff  Change the output format to uncompressed TIFF.

       -pam   Change the output format to PAM (retains alpha).

       -ppm   Change the output format to PPM (discards alpha).

       -pgm   Change  the  output  format  to  PGM.  The  output  consists  of
              luma/chroma  samples instead of RGB, using the IMC4 layout. This
              option is mainly for verification and debugging purposes.

       -yuv   Change the output format to raw  YUV.  The  output  consists  of
              luma/chroma-U/chroma-V  samples  instead  of  RGB, saved sequen‐
              tially as individual planes. This option is mainly for verifica‐
              tion and debugging purposes.

       -nofancy
              Don't  use the fancy upscaler for YUV420. This may lead to jaggy
              edges (especially the red ones), but should be faster.

       -nofilter
              Don't use the in-loop filtering process even if it  is  required
              by  the  bitstream.  This may produce visible blocks on the non-
              compliant output, but it will make the decoding faster.

       -dither strength
              Specify a dithering strength between 0 and 100. Dithering  is  a
              post-processing  effect  applied  to  chroma components in lossy
              compression.  It helps by smoothing gradients and avoiding band‐
              ing artifacts.

       -nodither
              Disable all dithering (default).

       -mt    Use multi-threading for decoding, if possible.

       -crop x_position y_position width height
              Crop  the decoded picture to a rectangle with top-left corner at
              coordinates (x_position, y_position) and size  width  x  height.
              This  cropping  area  must  be fully contained within the source
              rectangle.  The top-left corner will be snapped to even  coordi‐
              nates  if  needed.   This  option  is meant to reduce the memory
              needed for cropping large images.  Note: the cropping is applied
              before any scaling.

       -scale width height
              Rescale  the  decoded  picture to dimension width x height. This
              option is mostly intended  to  reducing  the  memory  needed  to
              decode large images, when only a small version is needed (thumb‐
              nail, preview, etc.).  Note: scaling is applied after cropping.

       -v     Print extra information (decoding time in particular).

       -noasm Disable all assembly optimizations.


BUGS
       Please    report     all     bugs     to     our     issue     tracker:
       http://code.google.com/p/webp/issues
       Patches  welcome!  See  this  page  to get started: http://www.webmpro‐
       ject.org/code/contribute/submitting-patches/


EXAMPLES
       dwebp picture.webp -o output.png
       dwebp picture.webp -ppm -o output.ppm
       dwebp -o output.ppm -- ---picture.webp
       cat picture.webp | dwebp -o - -- - > output.ppm


AUTHORS
       dwebp was written by the WebP team.
       The latest source tree is available at http://www.webmproject.org/code

       This  manual  page  was  written  by  Pascal   Massimino   <pascal.mas‐
       simino@gmail.com>, for the Debian project (and may be used by others).


SEE ALSO
       cwebp(1), gif2webp(1), webpmux(1)
       Please refer to http://developers.google.com/speed/webp/ for additional
       information.

   Output file format details
       PAM: http://netpbm.sourceforge.net/doc/pam.html
       PGM: http://netpbm.sourceforge.net/doc/pgm.html
       PPM: http://netpbm.sourceforge.net/doc/ppm.html
       PNG: http://www.libpng.org/pub/png/png-sitemap.html#info



                                 July 22, 2014                        DWEBP(1)
